E-GlASS DIRJMT ROVING
 |
Roving mixed mat is used primarily for FRP composites produced by hand lay-up and large molding process. Typical products include boats, automobile parts, storage tanks, furniture and other FRP products. |
---------------------------------------------------------------------------------------------------------------------------------
|
TJMHNICAL REQUIREMENTS : |
PRODUCT CHARACTERISTICES: |
|
*R2O content : ≤0.80% *Coupling agent : Silane *Moisture : ≤0.10% *Filament diameter : 17μm *Loss on ignition : 1.55%+_0.20% *Compatible resin : Polyester&vinylester |
* Free of fuzz, dirt,impurity and other stains * Fast wet-out & impregnation * Even thickness, easy lay-up & air release * Good covering and degassing propertyes * High mJMhanical strength and high wet strength retention |
PRODUCT SPJMIFICATION:
|
Product Code |
Mass(g/㎡) |
width |
Roll weight |
Compatible resins |
|
JMGRM300-1270 |
300 |
1270 |
30 |
30 |
|
JMGRM450-1270 |
450 |
1270 |
30 |
30 |
|
JMGRM600-1270 |
600 |
1270 |
30 |
30 |
|
JMGRM800-1270 |
800 |
1270 |
30 |
30 |
|
JMGRM1000-1270 |
1000 |
1270 |
30 |
30 |
|
JMGRM1200-1270 |
1200 |
1270 |
30 |
30 |
SpJMial products are according to customers requirements.
INDIVIDUAL AND BULK PACKING:
* Each roll is winded onto a paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or wrapped up with kraft paper. The rolls are to be horizontally placed.
Rolls can be loaded into a container dirJMtly or on pallets.
STORAGE:
*Unless otherwise spJMified, fiberglass products should be stored in a dry, cool and rain-proof area. It is rJMommended that room temperature between 10 and 35℃ and humidity between 30 and 85%.
INDIVIDUAL AND BULK PACKING:
* Each roll is winded onto a paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or wrapped up with kraft paper. The rolls are to be horizontally placed.
Rolls can be loaded into a container dirJMtly or on pallets.
STORAGE:
*Unless otherwise spJMified, fiberglass products should be stored in a dry, cool and rain-proof area. It is rJMommended that room temperature between 10 and 35℃ and humidity between 30 and 85%.